FEATURES
-
Flush mounted sensor
-
CO₂ sensor measurement of indoor air quality (IAQ)
-
Easy and fast installation
-
Capacitive button for air quality indication
-
0 - 10V output
The flush mounted sensor module gives you the
flexibility to make different solutions for your ventilation systems. It is now easy to make a demand controlled ventilation (DCV) system by using CO₂ sensors. And as it is flush mounted, it will fit existing switching design instead of a different design sensor on the wall.
APPLICATION
The VMI-02VCW01 is a user control and CO₂ sensor for ventilation systems in homes and buildings. The device communicates information about the CO₂ level via 0-10V signal.
The VMI-02VCW01 translates the measured CO₂ value
in a range from 400 ppm to 2000 ppm to an output
voltage between 2-10V, where 2V indicates 400 ppm and 10V indicates 2000 ppm.
The sensor module is a device to measure air quality in a residential or commercial environment. The typical application is to measure indoor air quality (IAQ) and transpond to a ventilation unit directly or to a Building Management System. The ventilation unit or Building Management System can use this information for
displaying or controlling the installation to the defined setpoint.
The device can be mounted in the most flush
mounted wall boxes in Europe. (For UK and Italy you need an adapter).
VMI-02VCW01
SENSOR MODULE
SENSORS FOR DCV SYSTEMS
OTHER PLATFORM PRODUCTS
FOR RESIDENTIAL VENTILATION
Heat recovery controller PCB - VMD
To integrate in a Heat recovery unit. It supports many different configurations and can be connected to other products either wirelessly or wired.
Mechanical extraction controller PCB - VMC
To integrate in a single fan system for control of the fan wired or wireless.
Digital input/output module - VMS
To connect wired applications to the wireless world
RS485 to RF interface - BRDG
Connect your RS485 product/building control system to the wireless world. Support of many RF products for heating and ventilation.
Ethernet to RF interface - BRDG
Connect the wireless ventilation and heating world to the outside world for new business applications.
Sensors platform - VMS, VMI
On wall or flush mounted CO2, humidity and temperature sensor for your system.
User interface without display (possible flush mount) - VMN
Simple high quality and flexible solution
User interface with display (possible flush mount) - VMI
A user interface to control and adapt the heat recovery PCB
App and cloud solution
Open up new business opportunities